A typical shop diagnostic fee is over $70. If you found this useful, give back to those that take the time to answer your questions. As little as $3 would be appreciated.
Jul 032015
 

ABS light is on, I read that you can jump between pin 4 & 12 of the data link connector and read codes on ABS light blinks. Tried it and did not work. Looked at connector and doesn’t look like there is a pin in cavity #4. have Snap On scanner but will not read ABS. Please Help

  One Response to “1998 Isuzu Trooper, 3.5L”

  1. You will need a Scan Tool that will read ABS codes or have a local shop do it.

    Scan Tools

 Leave a Reply

Or