my tail lights and license plate lights are out. all other lights work to include brake lights turn signals and reverse lights. All the fuse’s are good and have 12 to 13 volts running through them. when all the bulbs are pulled out for the license plate and the tail lights all the sockets recieve 12 to 13 volts. but as soon as one bulb is put in all the sockets drop all the voltage. i’m figuring it is a series circuit of some type i just can’t figure out why it drops all voltage as soon as anything that pulls a load is put on it. <\/p>\n","protected":false},"excerpt":{"rendered":"