{"id":38227,"date":"2017-01-20T09:46:23","date_gmt":"2017-01-20T14:46:23","guid":{"rendered":"http:\/\/www.freeautomechanic.com\/mechanic\/forum\/?p=38227"},"modified":"2017-01-20T09:46:23","modified_gmt":"2017-01-20T14:46:23","slug":"caliper-tools-2005-chrysler-town-country","status":"publish","type":"post","link":"https:\/\/www.freeautomechanic.com\/mechanic\/forum\/2017\/01\/caliper-tools-2005-chrysler-town-country","title":{"rendered":"Caliper Tools 2005 Chrysler Town & Country"},"content":{"rendered":"

\"2005tools needed to change front calipers<\/p>\n

\n

RESPONSE<\/p>\n

Estimated time for a shop to replace a single front brake caliper is 0.8 hours or 1.4 for both.<\/p>\n

Caliper Replacement Tools<\/h3>\n
    \n
  1. Vehicle Jack and Stands – Used to raise and support vehicle.<\/li>\n
  2. Wheel Lug Nut Removal Tool – used to remove wheel.<\/li>\n
  3. Brake Pedal Depressing Tool (Holding Tool) – This is to hold the brake pedal down to isolate the master cylinder<\/a> from the hydraulic system. It disallows the brake fluid to completely drain out of the brake reservoir.<\/li>\n
  4. Metric Socket Set and Ratchet 8mm – 19mm – Used to remove retaining bolts.<\/li>\n
  5. Drain Pan – Used to catch brake fluid.<\/li>\n
  6. C-Clamp – Used to compress the replacement caliper if necessary.<\/li>\n
  7. Torque Wrench – Used to install the Banjo bolt with new washers to 35 ft. lbs.<\/li>\n<\/ol>\n

    \"Brake<\/p>\n

    Brake Caliper Mounting Description<\/h4>\n
      \n
    1. Caliper Hose<\/li>\n
    2. Caliper Mounting Bolts<\/li>\n
    3. Banjo Fitting<\/li>\n<\/ol>\n

      Not a tool but you will need brake fluid and probably a few rags.<\/p>\n