{"id":52441,"date":"2017-06-21T15:01:22","date_gmt":"2017-06-21T20:01:22","guid":{"rendered":"https:\/\/www.freeautomechanic.com\/mechanic\/forum\/?p=52441"},"modified":"2017-06-21T15:01:40","modified_gmt":"2017-06-21T20:01:40","slug":"bearing-noisefitclutch-noise-2011-honda-jazz","status":"publish","type":"post","link":"https:\/\/www.freeautomechanic.com\/mechanic\/forum\/2017\/06\/bearing-noisefitclutch-noise-2011-honda-jazz","title":{"rendered":"Clutch Noise 2011 Honda Jazz \/ Fit 1.5i EX-S"},"content":{"rendered":"

\"2011Strange chirp noise<\/h3>\n

I drive a 2011 Honda Jazz 1.5 EX-S (Pre-facelift), the car has about 112500km on the clock at the moment.<\/p>\n

Now these are my issues. There is a strange chirp noise if I put a little too much gas while releasing the clutch. Doesn’t happen all the time. After the vehicle has warmed up a bit, there is a squeak while releasing the clutch. And while driving slow in low gears. But this squeak is not existent while in neutral. This noise is also heard if I lift the car and turn the front wheels while in gear, but not heard in neutral.<\/p>\n

The next issue, but I am unsure whether it is related, is when I accelerate I hear what I would say is a metallic rattling, sounds like a loose bearing noise, but is most apparent if I am say, in the wrong gear trying to accelerate, or while cruising in a higher gear. (I have been informed my transmission mount is a “little soft”, could this be the rattle?) and while slowing down with the clutch engaged with no gas.<\/p>\n

If I rev the car in neutral or with the clutch disengaged, none of the above noises are apparent. There is however a slight moan at a certain rpm when the revs drop for I would say half a second – probably unrelated.<\/p>\n

Any assistance would be greatly appreciated!<\/p>\n

\n

Clutch Release Bearing<\/h3>\n

First issue: Pressure Plate Release Bearing would be my first guess.<\/p>\n

Second issue: May be related but might be a different part rattling around near the clutch release fork. If the release fork set spring has broken it might be the cause of all your problems.<\/p>\n