![\"2011](\"https:\/\/www.freeautomechanic.com\/mechanic\/forum\/wp-content\/uploads\/2017\/08\/2011-lincoln-mks.jpg\")
<\/p>\n<\/p>\n
Does the speaker cover on the passenger front door come off without having to remove the door panel ? It is dented in and I just want to pop it back to shape. thank you<\/p>\n
The speaker cover is part of the door panel. Removal of the door panel will be required.<\/p>\n
All trim panels
\n1.Pull outward and remove the sail panel. \u2022If equipped, disconnect the electrical connector.<\/p>\n
2.Remove the front door inside handle assembly bolt cover.
\n3.Remove the front door inside door handle assembly bolt. \u2022To install, tighten to 7 Nm (62 lb-in).<\/p>\n
4.Remove the front door trim panel center bolt. \u2022To install, tighten to 7 Nm (62 lb-in).<\/p>\n
5.Remove the trim panel grommet and remove the front door trim panel rear screw. \u2022To install, tighten to 1 Nm (9 lb-in).<\/p>\n
6.Remove the front door trim panel lower screws.<\/p>\n
7. NOTICE: Avoid pulling directly on the upper rear corner (vinyl portion) of the door trim panel during removal to prevent damage to the door trim panel.
\nRemove the front door trim panel. \u2022Pull the front door trim panel outward to release the retaining clips.
\n\u2022Disconnect the inside door handle cable.
\n\u2022If equipped, disconnect the electrical connectors.
\nWindow garnish moulding
\n8.Remove the window garnish moulding screw.
\n9.Remove the window garnish moulding.<\/p>\n
All trim panels<\/p>\n
10. NOTICE: To avoid damage to the door trim panel, remove any retaining clips from the body and attach them to the door trim panel.
\nTo install, reverse the removal procedure.<\/p>\n","protected":false},"excerpt":{"rendered":"