{"id":55823,"date":"2018-09-08T10:16:04","date_gmt":"2018-09-08T15:16:04","guid":{"rendered":"https:\/\/www.freeautomechanic.com\/mechanic\/forum\/?p=55823"},"modified":"2024-02-11T08:59:15","modified_gmt":"2024-02-11T16:59:15","slug":"2006-toyota-sequoia-sr5-would-not-turn-over","status":"publish","type":"post","link":"https:\/\/www.freeautomechanic.com\/mechanic\/forum\/2018\/09\/2006-toyota-sequoia-sr5-would-not-turn-over","title":{"rendered":"2006 Toyota Sequoia sr5 would not turn over"},"content":{"rendered":"

\"2006<\/h3>\n

New rack and pinion<\/h3>\n

Well I put a new rack and pinion in my 2006 Toyota Sequoia but had a issue. I didn’t tighten the drive shaft screw at bottom. But did tighten the two on top I was going to back to tht after I screwed the nozzles in I got the one small looking nozzle but the other would not tighten for nothing it didn’t look stripped it looked fine anyway the sun was going down and I had to get ready for work so I thought to my self I could tighten the one screw on driveshaft and put the nozzle in with my tires on ground anyway.<\/p>\n

I put my tires on and took it off the jack and stands and started working on the nozzle which I couldn’t get to tighten but as I’m looking up I see the driveshaft screws are turned the opposite direction, and even tho I didn’t get the nozzle on all the way I just wanted to try to start my truck it would not turn over my truck always turns over all the lights lit the dash and made a weird sound but not even close to starting
\nYou
\nDo u think there’s a problem tht my screws for my driveshaft are turned the opposite way in which I can’t reach is the reason my truck won’t start or the nozzle not in right or both<\/p>\n

\n

Would not turn over<\/strong><\/h3>\n

No. I think your battery<\/a> drained while you were working on it. This is VERY common. Fully charge the battery and the vehicle should start right up as normal.<\/p>\n