Apr 102018

GWM Steed

I have a 2010 steed 5, 2.8 Tci bakkie and after reconditioning the engine it cranks but won’t start. I can start and run it using quick start but the moment I stop spraying the quick start it cut off, injectors is on the original cylinder, it just seem that the injectors are not letting fuel in. If someone had encountered this problem before please contact me via email [email protected]

Since you have had this apart, I would start by checking for loose connections or things that are not plugged in correctly. Usually a check engine light will illuminate and help guide you in the right direction. If you have any codes present feel free to post them below.

GWM Steed 5 2.5 Diesel 2013 revs seem limited

 Auto Repair Questions, GWM  Comments Off on GWM Steed 5 2.5 Diesel 2013 revs seem limited
Jun 142017

2013 GWM Steed

Revs seem limited

Vehicle runs fine and then suddenly loss of power and revs seem limited below 2600RPM, switch ignition off and then on and it runs well. I notice the problem is worse after refueling. It keeps cutting out every few hundred meters. After a few days problem is less frequent until the next refuel.

Sounds like you may have some moisture in the fuel. Have the fuel filter replaced and by all means refuel at a different station next time.