it sounds like a spark knock at 2000 rpms and up does not knock when ideling ive put a crank and bearings and a timming chain set in it already
Keywords:knocking noise
it sounds like a spark knock at 2000 rpms and up does not knock when ideling ive put a crank and bearings and a timming chain set in it already
Spark knock is caused by low octane or bad timing. It is possible that you have the timing a tooth off since you say you just changed this.
it was doing this befor i changed the timming chain & crank and bearings.
Spark knock is caused by low octane or bad timing.
You could try some octane boost in the gas tank….
Comments are closed.