Nov 072016
 

2007 Chrysler PacificaCar does not rev beyond 3000 rpm


The engine will not rev past 3,000 rpm in park or neutral. This is to prevent damage to the engine and preserve the warranty. This is accomplished with a built in rev limiter. If this is occurring while driving there may be an issue causing the computer to enter into low power mode. A check engine light may be illuminated on the dash. You will need to have the engine codes pulled with a scan tool. This can be done for free at just about any local auto parts store. Post the codes below for more information.

  2 Responses to “Does Not Rev 2006 Chrysler Pacifica”

  1. Yes my eng light is on it don’t rev over 3.00 when I’m diving about 60to 65 mph and press the gas i can only get up to about 70 mph I loes power and speed intell my speed gets down to 65 what can I do about that problume

  2. Yes my eng light is on it don’t rev over 3.00 when I’m diving about 60to 65 mph and press the gas i can only get up to about 70 mph I loes power and speed intell my speed gets down to 65 what can I do about that problume

 Leave a Reply