Car’s engine was just completely rebuilt. No engine lights on. Codes are all clear. But when you drive off as soon as you take your foot off the gas car will idle rough then stall. It restarts no problem!
Thermostat Housing for 2017-2022 Chevrolet Colorado or GMC Canyon with the 3.6L engine. This repair took care of the check…
Removal & Installation Remove transmission. If original clutch cover will be reinstalled, mark position of cover on flywheel for assembly…
Engine has no codes. Scan tool shows cam and crank correlation are good. Fuel pressure from pump is at 60…
Headlamp Bulb R&R Warning: halogen bulb contains gas under pressure. bulb may shatter if glass envelope is scratched or if…
Intake CVVT came apart and blew a hole in the valve cover. How much would something like that cause to…
Hey everyone, I’m looking to upgrade the steering wheel on my BMW F30 and came across this option: Has anyone…
View Comments
Several things are possible here since it was just rebuilt. A spark plug wire might be crossed. The timing chain might be a tooth off. EGR might be clogged or unplugged. IAC might not be calibrating. TPS Sensor might be unplugged or bad connection. Best approach would be to eliminate by testing. Double check you connections and wiring. Make sure you temp sensors are connected and the engine has had a chance to warm up even if you have to hod your foot on the gas pedal till it is warm.